Characteristics Of Wall And Floor Tiles
- Jan 29, 2018 -

The development of new products of China's wall and floor tiles, in addition to color varieties, to increase its function is also a development direction. For example: Heat preservation energy-saving brick-this kind of brick uses the porous material to make the body, the volume density in the 0.6~10, again in the body surface glazing treatment, causes it to have the porous material the heat preservation energy saving effect, but also has the characteristic of the glazed tile. This kind of brick also can not glaze, when burning the surface will naturally form a cover, for example, use red mud as blank fired bricks rather natural generous.

Color Glazed tile--this kind of brick in the production, the glaze is added a colored agent composed of rare earth metal oxides, which uses the electron leap in light to produce a differential, which causes the glaze to take on selective absorption and reflection, and the absorption is different from the reflection degree in the visible range.

Eco-Health Tiles-this brick is the antibacterial agent attached to the ceramic surface, or directly added to the glaze, so that the surface of the ceramic has antibacterial. The antibacterial nature of ceramics mainly includes the following two kinds: using silver ions and their compounds antibacterial (known as Silver Series Antibacterial agent), using light catalysis semiconductor.

Antistatic brick-this kind of wall and floor tile is usually to introduce the metal oxide with the semiconductor property in glaze or billet, so that the conductivity of glaze or billet satisfies the requirement.

Permeable pavement brick-this kind of brick has the common square brick's style, but also has the water permeable, the waterproof, the Non-slip function. It is characterized by the formation of a porous and coherent structure of the hole in the brick, is the replacement of square brick products, this brick is in the blanks with a burn-loss agent or foaming agent made.

Glazed tiles-this brick is characterized by a thick layer of transparent glaze on the surface of porcelain tiles (about 1.5mm after sintering), after the firing of glazed surface polishing, if the glazing before the printing, it has similar glaze under the effect of color. This kind of brick has strong sense of feeling and good decoration effect. There are two methods to apply thick glaze to brick: one is to apply glaze to dry, the other is to spray and dry the glaze, and to form with two times of cloth method.


Previous: No Information

Next: Characteristics Of Micro-crystalline Tiles